Nh00 Fuse Holder Manufacturers

Galaxy Fuse’s (Yinrong) 690VAC 100A Australia Type Clear HRC Cutout Fuse is designed to ensure a secure connection and low contact resistance throughout and is typically used to protect the supply to a flat or a dwelling and used as a service head. Glass-reinforced Polyester (DMC) material provides strength, durability, and excellent tracking resistance.

Galaxy Fuse (Yinrong) YREVu series gEV fuses are specially designed and tested to provide optimum auxiliary protection and high-performance protection in electrical systems and Hybrid Electrical Vehicles, up to 500VDC in amperes from 70-100A. The YREVu-500VDC 100A EV Automotive UPS Fuse Link was specifically built from the ground up to meet the automotive vibration requirements and standards of the electric vehicle industry.

The YRPV-30X 1100VDC 30A 10×38mm Solar PV DIN Rail Fuse Holder with Indicator Light is designed for 1100VDC PV Fuse to provide rapid protection under conditions of overload current associated with the Photovoltaic (PV) systems. The recommended fuse link size is 10×38mm, securing the 1100VDC Photovoltaic (PV) systems. The most common applications of this YRPV-30X 1100VDC 10×38mm Photovoltaic fuse are PV combiner boxes, inverters, Photovoltaic strings, PV array protection, etc. YRPV-30X 1100VDC 10×38mm PV Fuse Holder was made of the flame-retardant material with V0 standard, and it's busbar mountable in the Photovoltaic (PV) system. YRPV-30X 1100VDC 10×38mm PV Fuse Holder are also available in 1, 2, 3 and 4-pole configurations.

Galaxy Fuse is a leading China 700V 400A YRS94FA High Speed Fuse manufacturers. China high speed fuse manufacturer Galaxy Fuse (Yinrong) provides various North American style round fuse. YRS94FA gR high speed fuse is specially designed to protect semiconductor devices. YRS94FA gR high speed fuse is designed for both overload and short-circuit protection. YRS94FA gR high speed fuse provides a wide amperage rating of 225-400A under the rated voltage of 700V (AC/DC), which are suitable for short-circuit and backup protection of frequency converters, rectifiers, inverters, various power supplies and other semiconductor equipment as well as batteries, motors, capacitors, wires and other equipment and devices. This YRS94FA gR high speed fuse conforms to the nation standard GB13539.4 and the international electrical committee standard IEC60269-4. Besides, it also can be used for short circuit for electric vehicle drive power systems, power conversion systems, energy storage and power batteries, energy storage capacitors, inverter controllers, chargers, wires, automotive devices and other backup protection.

Galaxy Fuse’s (Yinrong) XRNT type high voltage transformer protection current limiting fuses are designed with insert installation, which is convenient for installation and removal. The 12kV 200A XRNT Transformer Protection Current Limiting Fuse is made of high-resistance metal wire and low-resistance metal wire. They are sealed in the fuse tube filled with high-purity quartz sand. The fuse tube is made of heat resistance, high-duty ceramic or epoxy glass. When a fault circuit happens and causes an arc, quartz sand will extinguishes the arc immediately.

The YRPV-63 1500VDC 63A 14×65mm Solar PV DIN Rail Fuse Holder is specifically designed to protect the Photovoltaic (PV) systems. The recommended fuse link is 14×65mm, which secures the 1500VDC Photovoltaic (PV) systems. The YRPV-63 1500VDC 14 x 65mm PV Fuse provides higher amperage protection in smaller spaces. The most commonly used YRPV-63 1500VDC 14×65mm PV Fuse applications include PV combiner boxes, inverters, PV string, PV array protection, etc. YRPV-63 1500VDC 14×65mm PV Fuse Holder was made of the flame-retardant shell with V0 standard, and the dead-front design made it available to fit most busbar mounting in the Photovoltaic (PV) system.