Fuse Holder For Inverter Manufacturers

Galaxy Fuse is a leading China 690V 1400A YRSA3-PK High Speed Fuse manufacturers. China high speed semiconductor fuse supplier Galaxy Fuse (Yinrong)’s YRSA3-PK gR high speed fuse is specially designed to protect semiconductor devices. YRSA3-PK gR high speed fuse is designed for both overload and short-circuit protection. YRSA3-PK gR high speed fuse provides a wide amperage rating of 500-1400A under the rated voltage of 690V/700VAC (IEC/UL), which can typically fit most semiconductor devices. This YRSA3-PK gR high speed fuse conformed to the nation standard GB13539.4 and the international electrical committee standard IEC60269-4. Besides, it also can be used for short circuit for electric vehicle drive power systems, power conversion systems, energy storage and power batteries, energy storage capacitors, inverter controllers, chargers, wires, automotive devices and other backup protection.

Galaxy Fuse’s (Yinrong) 690VAC 100A Australia Type Clear HRC Cutout Fuse is designed to ensure a secure connection and low contact resistance throughout and is typically used to protect the supply to a flat or a dwelling and used as a service head. Glass-reinforced Polyester (DMC) material provides strength, durability, and excellent tracking resistance.

The YRPV-30 1500VDC 10×38mm PV Fuse Holder is specifically designed to provide rapid protection under conditions of overload current associated with Photovoltaic (PV) systems. The recommended fuse link size is 10×38mm, which secures the 1500VDC Photovoltaic (PV) systems. The YRPV-301500VDC 10×38mm PV Fuse is most commonly used in PV combiner boxes, inverters, etc. 1500VDC 30A 10×38mm Solar PV DIN Rail Fuse Holder was made of the flame-retardant shell with V0 standard, and the dead-front design made it possible to match the busbar mounting in the Photovoltaic (PV) system. 10×38mm Photovoltaic Fuse Holder is also available in 1, 2, 3 and 4-pole configurations.

Galaxy Fuse (Yinrong) YREVu series gEV fuses are specially engineered and tested to provide optimum auxiliary protection and high-performance protection in electrical systems and Hybrid Electrical Vehicles, up to 500VDC in amperes from 10-50A. The YREVu-500VDC 50A EVSE UPS Battery Fuse Link was specifically built from the ground up to meet the automotive vibration requirements and standards of the electric vehicle industry.

The YRPV-40 1500VDC 40A 14×51mm Solar PV DIN Rail Fuse Holder is specifically designed to protect and isolate Solar Photovoltaic (PV) strings. The recommended fuse link size is 14×51mm and securely protects the 1500VDC Photovoltaic (PV) systems. The YRPV-40 1500VDC 14×51 mm PV fuse is most commonly used in Photovoltaic PV combiner boxes, inverters, battery charge controllers, etc. YRPV-40 1500VDC 14×51 mm PV Fuse Holder has a shell that meets the V0 flame-retardant standard and has a front-facing design to meet the requirements of the PV system for the busbar installation.

The YRPV-30X 1100VDC 30A 10×38mm Solar PV DIN Rail Fuse Holder with Indicator Light is designed for 1100VDC PV Fuse to provide rapid protection under conditions of overload current associated with the Photovoltaic (PV) systems. The recommended fuse link size is 10×38mm, securing the 1100VDC Photovoltaic (PV) systems. The most common applications of this YRPV-30X 1100VDC 10×38mm Photovoltaic fuse are PV combiner boxes, inverters, Photovoltaic strings, PV array protection, etc. YRPV-30X 1100VDC 10×38mm PV Fuse Holder was made of the flame-retardant material with V0 standard, and it's busbar mountable in the Photovoltaic (PV) system. YRPV-30X 1100VDC 10×38mm PV Fuse Holder are also available in 1, 2, 3 and 4-pole configurations.